China Factory for Injection Moulding Machinery - Thin Wall High Speed Injection GH-210 – Beilun
China Factory for Injection Moulding Machinery - Thin Wall High Speed Injection GH-210 – Beilun Detail:
Quality control of all externally purchased parts
We are extremely rigorous in the selection of suppliers. 90% of the procurement of hydraulic components and electrical components comes from world-renowned brands. At the same time, for these components, we can promise at least one year of quality assurance.
Wide variety of physical tests
Various physical tests are performed on screws, barrels, wall panels and tie rods. Before performing precision machining, our relevant quality inspectors must check the hardness and flaw detection. At the same time, it will also check whether the hardness is consistent.
Quality control of injection molding machine
This is a QC team that controls the quality of machinery, hydraulics, electronics, etc. Our goal is to become a world-class supplier of injection molding.
Project |
Project name |
unit |
GH210 |
Injection unit |
SCREW DIAMETER |
mm |
45 |
INJECITON STROKE |
mm |
225 |
|
SCREW L/D RATIO |
L/D |
25 |
|
SHOT VOLUME(THEORETICAL) |
CM3 |
358 |
|
INJECTION WEIGHT(PP) |
g |
322 |
|
oz |
11.36 |
||
INJECTION PRESSURE |
Mpa |
157 |
|
DWELL PRESSYRE |
Kg/cm³ |
1599 |
|
NJECTION SPEED |
mm/sec |
380 |
|
INJECTION RATE |
cm³sec |
496.5 |
|
SCREW SPEED |
rpm |
400 |
|
clamping unit
|
CLAMP FORCE |
Kn |
2100 |
OPEN STROKE |
mm |
490 |
|
SPACE BETWEEN TIE BARS(V×H) |
mm×mm |
520×520 |
|
MAX.MOULD HEIGHT |
mm |
550 |
|
MIN.MOULD HEIGHT |
mm |
210 |
|
EJECTOR STROKE |
mm |
150 |
|
EJECTOR FORCE |
Kn |
61.5 |
|
EJECTOR NUMBER |
N |
5 |
|
others |
MAX.PUMP PRESSURE |
Mpa |
23 |
PUMP MOTOR POWER |
Kw |
61.8 |
|
HEATING POWER |
Kw |
15.05 |
|
MACHINE DIMENSION(L*W*H) |
M×m×m |
5.74×1.45×1.78 |
|
OILTANK CUBAGE |
L |
300 |
|
MACHINE WEIGHT(ESTIMATE) |
T |
8.3 |
Product detail pictures:
Related Product Guide:
We have now a specialist, efficiency staff to provide good quality company for our consumer. We normally follow the tenet of customer-oriented, details-focused for China Factory for Injection Moulding Machinery - Thin Wall High Speed Injection GH-210 – Beilun , The product will supply to all over the world, such as: Victoria, Sacramento, Georgia, We welcome you to visit our company, factory and our showroom displayed various products that will meet your expectation, meanwhile, it is convenient to visit our website, our sales staff will try their efforts to provide you the best service. If you need more information, please do not hesitate to contact us by E-mail or telephone.
By Audrey from Yemen - 2017.01.11 17:15
The factory has advanced equipment, experienced staffs and good management level, so product quality had assurance, this cooperation is very relaxed and happy!
By Christina from Pakistan - 2017.08.18 11:04