Factory Cheap Hot Cup Injection Molding Machine - Thin Wall High Speed Injection GH-210 – Beilun
Factory Cheap Hot Cup Injection Molding Machine - Thin Wall High Speed Injection GH-210 – Beilun Detail:
Quality control of all externally purchased parts
We are extremely rigorous in the selection of suppliers. 90% of the procurement of hydraulic components and electrical components comes from world-renowned brands. At the same time, for these components, we can promise at least one year of quality assurance.
Wide variety of physical tests
Various physical tests are performed on screws, barrels, wall panels and tie rods. Before performing precision machining, our relevant quality inspectors must check the hardness and flaw detection. At the same time, it will also check whether the hardness is consistent.
Quality control of injection molding machine
This is a QC team that controls the quality of machinery, hydraulics, electronics, etc. Our goal is to become a world-class supplier of injection molding.
|
Project |
Project name |
unit |
GH210 |
|
Injection unit |
SCREW DIAMETER |
mm |
45 |
| INJECITON STROKE |
mm |
225 |
|
| SCREW L/D RATIO |
L/D |
25 |
|
| SHOT VOLUME(THEORETICAL) |
CM3 |
358 |
|
| INJECTION WEIGHT(PP) |
g |
322 |
|
|
oz |
11.36 |
||
| INJECTION PRESSURE |
Mpa |
157 |
|
| DWELL PRESSYRE |
Kg/cm³ |
1599 |
|
| NJECTION SPEED |
mm/sec |
380 |
|
| INJECTION RATE |
cm³sec |
496.5 |
|
| SCREW SPEED |
rpm |
400 |
|
|
clamping unit
|
CLAMP FORCE |
Kn |
2100 |
| OPEN STROKE |
mm |
490 |
|
| SPACE BETWEEN TIE BARS（Ｖ×Ｈ） |
mm×mm |
520×520 |
|
| MAX.MOULD HEIGHT |
mm |
550 |
|
| MIN.MOULD HEIGHT |
mm |
210 |
|
| EJECTOR STROKE |
mm |
150 |
|
| EJECTOR FORCE |
Kn |
61.5 |
|
| EJECTOR NUMBER |
N |
5 |
|
|
others |
MAX.PUMP PRESSURE |
Mpa |
23 |
| PUMP MOTOR POWER |
Kw |
61.8 |
|
| HEATING POWER |
Kw |
15.05 |
|
| MACHINE DIMENSION(L*W*H) |
M×m×m |
5.74×1.45×1.78 |
|
| OILTANK CUBAGE |
L |
300 |
|
| MACHINE WEIGHT（ESTIMATE） |
T |
8.3 |
Product detail pictures:
Related Product Guide:
As for aggressive rates, we believe that you will be searching far and wide for anything that can beat us. We can easily state with absolute certainty that for such good quality at such charges we are the lowest around for Factory Cheap Hot Cup Injection Molding Machine - Thin Wall High Speed Injection GH-210 – Beilun , The product will supply to all over the world, such as: Manila, Brazil, Provence, Company name, is always regarding quality as company' s foundation, seeking for development via high degree of credibility , abiding by ISO quality management standard strictly, creating top-ranking company by spirit of progress-marking honesty and optimism.
By Jo from Istanbul - 2018.12.28 15:18
In our cooperated wholesalers, this company has the best quality and reasonable price, they are our first choice.
By Josephine from Belgium - 2017.10.23 10:29
