Factory For Dual Shot Injection Molding - Thin Wall High Speed Injection GH-250 – Beilun
Factory For Dual Shot Injection Molding - Thin Wall High Speed Injection GH-250 – Beilun Detail:
Quality control of all externally purchased parts
We are extremely rigorous in the selection of suppliers. 90% of the procurement of hydraulic components and electrical components comes from world-renowned brands. At the same time, for these components, we can promise at least one year of quality assurance.
Wide variety of physical tests
Various physical tests are performed on screws, barrels, wall panels and tie rods. Before performing precision machining, our relevant quality inspectors must check the hardness and flaw detection. At the same time, it will also check whether the hardness is consistent.
Quality control of injection molding machine
This is a QC team that controls the quality of machinery, hydraulics, electronics, etc. Our goal is to become a world-class supplier of injection molding.
| Project |
Project name |
Uint |
GH250 |
|
Injection unit |
SCREW DIAMETER |
mm |
45 |
| INJECITON STROKE |
mm |
225 |
|
| SCREW L/D RATIO |
L/D |
25 |
|
| SHOT VOLUME(THEORETICAL) |
CM3 |
358 |
|
| INJECTION WEIGHT(PP) |
g |
322 |
|
|
oz |
11.36 |
||
| INJECTION PRESSURE |
Mpa |
157 |
|
| DWELL PRESSYRE |
Kg/cm³ |
1599 |
|
| NJECTION SPEED |
mm/sec |
380 |
|
| INJECTION RATE |
cm³sec |
496.5 |
|
| SCREW SPEED |
rpm |
400 |
|
|
clamping unit
|
CLAMP FORCE |
Kn |
2100 |
| OPEN STROKE |
mm |
490 |
|
| SPACE BETWEEN TIE BARS（Ｖ×Ｈ） |
mm×mm |
520×520 |
|
| MAX.MOULD HEIGHT |
mm |
550 |
|
| MIN.MOULD HEIGHT |
mm |
210 |
|
| EJECTOR STROKE |
mm |
150 |
|
| EJECTOR FORCE |
Kn |
61.5 |
|
| EJECTOR NUMBER |
N |
5 |
|
|
others |
MAX.PUMP PRESSURE |
Mpa |
23 |
| PUMP MOTOR POWER |
Kw |
61.8 |
|
| HEATING POWER |
Kw |
15.05 |
|
| MACHINE DIMENSION(L*W*H) |
M×m×m |
5.74×1.45×1.78 |
|
| OILTANK CUBAGE |
L |
300 |
|
| MACHINE WEIGHT（ESTIMATE） |
T |
8.3 |
Product detail pictures:
Related Product Guide:
Fast and superior quotations, informed advisers to help you choose the correct merchandise that suits all your requirements, a short generation time, responsible quality control and different services for paying and shipping affairs for Factory For Dual Shot Injection Molding - Thin Wall High Speed Injection GH-250 – Beilun , The product will supply to all over the world, such as: Turkey, Detroit, New Delhi, All these products are manufactured in our factory located in China. So we can guarantee our quality seriously and availably. Within these four years we sell not only our products but also our service to clients throughout the world.
By Dawn from Denmark - 2018.12.11 11:26
Company director has very rich management experience and strict attitude, sales staff are warm and cheerful, technical staff are professional and responsible,so we have no worry about product,a nice manufacturer.
By Bruno Cabrera from Benin - 2017.08.18 18:38
Products categories
-
Excellent quality Silicone Mould Making Machine...
-
Top Quality Mini Moulding Machine - Thin Wall ...
-
Fast delivery Bottle Blowing - Thin Wall High ...
-
Factory wholesale Silicone Injection Molding Ma...
-
Professional China Custom Plastic Molding Compa...
-
High reputation Plastic Crate Making Machine -...