Lowest Price for Compression Molding Press - Thin Wall High Speed Injection GH-210 – Beilun
Lowest Price for Compression Molding Press - Thin Wall High Speed Injection GH-210 – Beilun Detail:
Quality control of all externally purchased parts
We are extremely rigorous in the selection of suppliers. 90% of the procurement of hydraulic components and electrical components comes from world-renowned brands. At the same time, for these components, we can promise at least one year of quality assurance.
Wide variety of physical tests
Various physical tests are performed on screws, barrels, wall panels and tie rods. Before performing precision machining, our relevant quality inspectors must check the hardness and flaw detection. At the same time, it will also check whether the hardness is consistent.
Quality control of injection molding machine
This is a QC team that controls the quality of machinery, hydraulics, electronics, etc. Our goal is to become a world-class supplier of injection molding.
Project |
Project name |
unit |
GH210 |
Injection unit |
SCREW DIAMETER |
mm |
45 |
INJECITON STROKE |
mm |
225 |
|
SCREW L/D RATIO |
L/D |
25 |
|
SHOT VOLUME(THEORETICAL) |
CM3 |
358 |
|
INJECTION WEIGHT(PP) |
g |
322 |
|
oz |
11.36 |
||
INJECTION PRESSURE |
Mpa |
157 |
|
DWELL PRESSYRE |
Kg/cm³ |
1599 |
|
NJECTION SPEED |
mm/sec |
380 |
|
INJECTION RATE |
cm³sec |
496.5 |
|
SCREW SPEED |
rpm |
400 |
|
clamping unit
|
CLAMP FORCE |
Kn |
2100 |
OPEN STROKE |
mm |
490 |
|
SPACE BETWEEN TIE BARS(V×H) |
mm×mm |
520×520 |
|
MAX.MOULD HEIGHT |
mm |
550 |
|
MIN.MOULD HEIGHT |
mm |
210 |
|
EJECTOR STROKE |
mm |
150 |
|
EJECTOR FORCE |
Kn |
61.5 |
|
EJECTOR NUMBER |
N |
5 |
|
others |
MAX.PUMP PRESSURE |
Mpa |
23 |
PUMP MOTOR POWER |
Kw |
61.8 |
|
HEATING POWER |
Kw |
15.05 |
|
MACHINE DIMENSION(L*W*H) |
M×m×m |
5.74×1.45×1.78 |
|
OILTANK CUBAGE |
L |
300 |
|
MACHINE WEIGHT(ESTIMATE) |
T |
8.3 |
Product detail pictures:
Related Product Guide:
Using a full scientific good quality administration system, very good quality and superior faith, we win good standing and occupied this discipline for Lowest Price for Compression Molding Press - Thin Wall High Speed Injection GH-210 – Beilun , The product will supply to all over the world, such as: Hungary, Mexico, Barbados, We put the product quality and customer's benefits to the first place. Our experienced salesmen supply prompt and efficient service. Quality control group make sure the best quality. We believe quality comes from detail. If you have demand, allow us to work together to get success.
By Genevieve from Denmark - 2018.11.04 10:32
The factory workers have rich industry knowledge and operational experience, we learned a lot in working with them,we are extremely grateful that we can encount a good company has excellent wokers.
By Pag from New Orleans - 2017.09.26 12:12