Personlized Products Injection Molding Companies - Thin Wall High Speed Injection GH-250 – Beilun

Short Description:

Product Detail

Product Tags

Feedback (2)

Being supported by an advanced and specialist IT team, we could give technical support on pre-sales & after-sales services for Foam Molding Machine, Injection Molding Machinery, Rubber Compression Molding Machine, If you are fascinated in any of our products, you should come to feel no cost to call us for more aspects. We hope to cooperate with a lot more close friends from all over the world.

Personlized Products Injection Molding Companies - Thin Wall High Speed Injection GH-250 – Beilun Detail:

Quality control of all externally purchased parts

We are extremely rigorous in the selection of suppliers. 90% of the procurement of hydraulic components and electrical components comes from world-renowned brands. At the same time, for these components, we can promise at least one year of quality assurance.

Wide variety of physical tests

Various physical tests are performed on screws, barrels, wall panels and tie rods. Before performing precision machining, our relevant quality inspectors must check the hardness and flaw detection. At the same time, it will also check whether the hardness is consistent.

Quality control of injection molding machine

This is a QC team that controls the quality of machinery, hydraulics, electronics, etc. Our goal is to become a world-class supplier of injection molding.

Project	Project name	Uint	GH250
Injection unit	SCREW DIAMETER	mm	45
	INJECITON STROKE	mm	225
	SCREW L/D RATIO	L/D	25
	SHOT VOLUME(THEORETICAL)	CM³	358
	INJECTION WEIGHT(PP)	g	322
	INJECTION WEIGHT(PP)	oz	11.36
	INJECTION PRESSURE	Mpa	157
	DWELL PRESSYRE	Kg/cm³	1599
	NJECTION SPEED	mm/sec	380
	INJECTION RATE	cm³sec	496.5
	SCREW SPEED	rpm	400
clamping unit	CLAMP FORCE	Kn	2100
	OPEN STROKE	mm	490
	SPACE BETWEEN TIE BARS（Ｖ×Ｈ）	mm×mm	520×520
	MAX.MOULD HEIGHT	mm	550
	MIN.MOULD HEIGHT	mm	210
	EJECTOR STROKE	mm	150
	EJECTOR FORCE	Kn	61.5
	EJECTOR NUMBER	N	5
others	MAX.PUMP PRESSURE	Mpa	23
	PUMP MOTOR POWER	Kw	61.8
	HEATING POWER	Kw	15.05
	MACHINE DIMENSION(LWH)	M×m×m	5.74×1.45×1.78
	OILTANK CUBAGE	L	300
	MACHINE WEIGHT（ESTIMATE）	T	8.3

Product detail pictures:

Related Product Guide:

We retain improving upon and perfecting our items and repair. At the same time, we perform actively to do research and progress for Personlized Products Injection Molding Companies - Thin Wall High Speed Injection GH-250 – Beilun , The product will supply to all over the world, such as: Durban, Malaysia, Tunisia, Our company has already have pass the ISO standard and we're fully respect our customer 's patents and copyrights. If the customer provides their own designs, We will guarantee that they will likely be the only one can have that merchandise. We hoping that with our good products can bring our customers a great fortune.

Cap Injection Molding Machine