Special Design for Bakelite Molding Machine - Thin Wall High Speed Injection GH-210 – Beilun

Short Description:

Product Detail

Product Tags

Feedback (2)

The customer satisfaction is our primary target. We uphold a consistent level of professionalism, quality, credibility and service for Slipper Making Machine Automatic, Abs Plastic Molding, Plastic Blowing Machine, Since establishment in the early 1990s, we have set up our sale network in USA, Germany, Asia, and several Middle Eastern countries. We aim to be a top class supplier for worldwide OEM and aftermarket!

Special Design for Bakelite Molding Machine - Thin Wall High Speed Injection GH-210 – Beilun Detail:

Quality control of all externally purchased parts

We are extremely rigorous in the selection of suppliers. 90% of the procurement of hydraulic components and electrical components comes from world-renowned brands. At the same time, for these components, we can promise at least one year of quality assurance.

Wide variety of physical tests

Various physical tests are performed on screws, barrels, wall panels and tie rods. Before performing precision machining, our relevant quality inspectors must check the hardness and flaw detection. At the same time, it will also check whether the hardness is consistent.

Quality control of injection molding machine

This is a QC team that controls the quality of machinery, hydraulics, electronics, etc. Our goal is to become a world-class supplier of injection molding.

Project	Project name	unit	GH210
Injection unit	SCREW DIAMETER	mm	45
	INJECITON STROKE	mm	225
	SCREW L/D RATIO	L/D	25
	SHOT VOLUME(THEORETICAL)	CM³	358
	INJECTION WEIGHT(PP)	g	322
	INJECTION WEIGHT(PP)	oz	11.36
	INJECTION PRESSURE	Mpa	157
	DWELL PRESSYRE	Kg/cm³	1599
	NJECTION SPEED	mm/sec	380
	INJECTION RATE	cm³sec	496.5
	SCREW SPEED	rpm	400
clamping unit	CLAMP FORCE	Kn	2100
	OPEN STROKE	mm	490
	SPACE BETWEEN TIE BARS（Ｖ×Ｈ）	mm×mm	520×520
	MAX.MOULD HEIGHT	mm	550
	MIN.MOULD HEIGHT	mm	210
	EJECTOR STROKE	mm	150
	EJECTOR FORCE	Kn	61.5
	EJECTOR NUMBER	N	5
others	MAX.PUMP PRESSURE	Mpa	23
	PUMP MOTOR POWER	Kw	61.8
	HEATING POWER	Kw	15.05
	MACHINE DIMENSION(LWH)	M×m×m	5.74×1.45×1.78
	OILTANK CUBAGE	L	300
	MACHINE WEIGHT（ESTIMATE）	T	8.3

Product detail pictures:

Related Product Guide:

Our staff through skilled training. Skilled skilled knowledge, potent sense of company, to satisfy the provider requirements of consumers for Special Design for Bakelite Molding Machine - Thin Wall High Speed Injection GH-210 – Beilun , The product will supply to all over the world, such as: Atlanta, Kenya, Czech republic, So that you can utilize the resource from the expanding info in international trade, we welcome shoppers from everywhere on-line and offline. In spite of the good quality solutions we provide, effective and satisfying consultation service is supplied by our professional after-sale service team. Product lists and detailed parameters and any other info weil be sent to you timely for your inquiries. So you should make contact with us by sending us emails or call us if you have any questions about our corporation. ou may also get our address info from our web page and come to our company to get a field survey of our merchandise. We've been confident that we have been going to share mutual achievement and create strong co-operation relations with our companions in this marketplace. We're searching forward for your inquiries.

Automatic Blow Moulding Machine