Trending Products Electric Injection - Thin Wall High Speed Injection GH-250 – Beilun
Trending Products Electric Injection - Thin Wall High Speed Injection GH-250 – Beilun Detail:
Quality control of all externally purchased parts
We are extremely rigorous in the selection of suppliers. 90% of the procurement of hydraulic components and electrical components comes from world-renowned brands. At the same time, for these components, we can promise at least one year of quality assurance.
Wide variety of physical tests
Various physical tests are performed on screws, barrels, wall panels and tie rods. Before performing precision machining, our relevant quality inspectors must check the hardness and flaw detection. At the same time, it will also check whether the hardness is consistent.
Quality control of injection molding machine
This is a QC team that controls the quality of machinery, hydraulics, electronics, etc. Our goal is to become a world-class supplier of injection molding.
| Project |
Project name |
Uint |
GH250 |
|
Injection unit |
SCREW DIAMETER |
mm |
45 |
| INJECITON STROKE |
mm |
225 |
|
| SCREW L/D RATIO |
L/D |
25 |
|
| SHOT VOLUME(THEORETICAL) |
CM3 |
358 |
|
| INJECTION WEIGHT(PP) |
g |
322 |
|
|
oz |
11.36 |
||
| INJECTION PRESSURE |
Mpa |
157 |
|
| DWELL PRESSYRE |
Kg/cm³ |
1599 |
|
| NJECTION SPEED |
mm/sec |
380 |
|
| INJECTION RATE |
cm³sec |
496.5 |
|
| SCREW SPEED |
rpm |
400 |
|
|
clamping unit
|
CLAMP FORCE |
Kn |
2100 |
| OPEN STROKE |
mm |
490 |
|
| SPACE BETWEEN TIE BARS（Ｖ×Ｈ） |
mm×mm |
520×520 |
|
| MAX.MOULD HEIGHT |
mm |
550 |
|
| MIN.MOULD HEIGHT |
mm |
210 |
|
| EJECTOR STROKE |
mm |
150 |
|
| EJECTOR FORCE |
Kn |
61.5 |
|
| EJECTOR NUMBER |
N |
5 |
|
|
others |
MAX.PUMP PRESSURE |
Mpa |
23 |
| PUMP MOTOR POWER |
Kw |
61.8 |
|
| HEATING POWER |
Kw |
15.05 |
|
| MACHINE DIMENSION(L*W*H) |
M×m×m |
5.74×1.45×1.78 |
|
| OILTANK CUBAGE |
L |
300 |
|
| MACHINE WEIGHT（ESTIMATE） |
T |
8.3 |
Product detail pictures:
Related Product Guide:
We keep improving and perfecting our products and service. At the same time, we work actively to do research and development for Trending Products Electric Injection - Thin Wall High Speed Injection GH-250 – Beilun , The product will supply to all over the world, such as: Turin, Bangalore, Mauritania, In order to meet more market demands and long-term development, a 150, 000-square-meter new factory is under construction, which will be put into use in 2014. Then, we shall own a large capacity of producing. Of course, we will continue improving the service system to meet the requirements of customers, bringing health, happiness and beauty to everyone.
By Muriel from Barcelona - 2017.09.29 11:19
The factory technical staff not only have high level of technology, their English level is also very good, this is a great help to technology communication.
By Dee Lopez from Jordan - 2018.05.22 12:13
Products categories
-
18 Years Factory Small Plastic Bottle Making Ma...
-
Factory For Transfer Moulding Machine - Thin W...
-
Wholesale Dealers of Medical Injection Molding ...
-
High Performance Plastic Injection Molding Mate...
-
OEM Customized Semi Automatic Plastic Injection...
-
China New Product Semi Automatic Blow Moulding ...
